MS Technical Parameters

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

MS Technical Parameters

Kien Nguyen
Administrator
Item Particle Dia.(mm) Equilibrium H2O Capacity(%) Compression Strength(N/n) Bulk Density
(Kg/L)
Abrasion Wear Quality(%) Water Content(%)
3A
ø 2 - 3
20
44
0.68
< 0.4
< 1.5
ø 3 - 5
59
ø 5 - 8
60
0.65
3.5x5x10
> 20 N/mm
< 0.6
4A
ø 2 - 3
21.5
30
0.66
< 0.2
ø 3 - 5
70
ø 5 - 8
80
0.68
< 0.1
3.5x5x10
20.5
> 18 N/mm
0.66
< 0.4
5A
ø 2 - 3
20
30
0.66
< 0.2
ø 3 - 5
60
ø 5 - 8
67
0.68
< 0.1
3.5x5x10
> 17 N/mm
0.64
< 0.4
13X
ø 2 - 3
23.5
25
0.64
< 0.1
ø 3 - 5
65
ø 5 - 8
80
0.65
3.5x5x10
23
> 18 N/mm
< 0.2
Trung Kiên, Nguyễn
@Liên hệ: http://www.trungkien.tk
@Facebook
@Điện Thoại: 093 7788 913 & 097 4787 435
@Zalo.Viber.Skype: 0169 8591 668
Reply | Threaded
Open this post in threaded view
|

Re: MS Technical Parameters

Kien Nguyen
Administrator
Molecular Sieve Application

1. 3A molecular sieve is mainly applied to absorb water molecular in drying natural gas and oil gases, especially in drying Catalystic Splitting Decomposition Oil gases and Alkene. So it is usually used as fine drying agent in medicine, food, glass industry and so on.

2. 4A molecular sieve is mainly used to make static dehydration in airtight gas or liquid system, it can remove the moleculars of ethyl alcohol, hydrogen sulphide, carbon dioxide, ethylene, acrylica, and also dry the alkane.

3. 5A molecular sieve is mainly applied to separate isomerism alkane. Meanwhile, it can also absorb the moleculars which can pass through in 3A and 4A molecular sieve and whose diameters are less than five angstrom. Especially the result is very evident in the changing pressure absorption system.

4. 13X molecualr sieve can absorb the moleculars which can pass through in 3A,4A and 5A molecular sieve and whose critical diameters are very large, such as hydrocarbon and isomerism alkane separation.

Molecular Sieve Regeneration

The regeneration gases which are in common use are nitrogen, air, hydrogen and alkane. The regeneration gases quantity is 0.2-1.2m3/h.kg or so, then heated to 200°C--350°C, the outlet temperature is 150°C or so, continuously heated for 3--4 hours, then put into the regeneration dry cool gases to cool to room temperature.
Trung Kiên, Nguyễn
@Liên hệ: http://www.trungkien.tk
@Facebook
@Điện Thoại: 093 7788 913 & 097 4787 435
@Zalo.Viber.Skype: 0169 8591 668